Genius Camcorder 32300018102 User Manual

Contents  
About this Guide...................................................................4  
FCC Statement.....................................................................4  
WEEE Notice........................................................................4  
CE Regulatory Notice...........................................................5  
Notes on Installation.............................................................5  
Caution.................................................................................5  
1
2
Introduction.................................................................... 6  
1.1  
1.2  
1.3  
Features ....................................................................6  
Package Contents.....................................................6  
Product Overview......................................................7  
Getting Started .............................................................. 8  
Inserting the Memory Card........................................8  
Installing in Vehicles..................................................9  
2.1  
2.2  
2.2.1  
2.2.2  
Mount to Windshield .............................. 9  
Adjust Device Position......................... 10  
2.3  
2.4  
Connecting to Power...............................................11  
Powering the Device On / Off..................................12  
2.4.1  
2.4.2  
Auto Power On/Off............................... 12  
Manual Power On/Off .......................... 12  
1
 
5
6
7
Installing the Software ................................................. 25  
Editing software........................................................... 26  
Specifications .............................................................. 27  
3
 
About this Guide  
The content in this document is for information purpose and is subject to change without  
prior notice. We made every effort to ensure that this User Guide is accurate and complete.  
However, no liability is assumed for any errors and omissions that may have occurred.  
The manufacturer reserves the right to change the technical specifications without prior  
notice.  
FCC Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
FCC Caution: Any changes or modifications not expressly approved by the party  
responsible for compliance could void the user's authority to operate this equipment.  
WEEE Notice  
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in  
private households in the European Union  
This symbol on the product or on the packaging indicates that this can not be  
disposed of as a household waste. You must dispose of your waste equipment  
and/or battery by handling it over to the applicable take-back scheme for the  
recycling of electrical and electronic equipment and/or battery. For more  
information about recycling of this equipment and/or battery, please contact  
your city office, the shop where you purchased the equipment or your  
household waste disposal service. The recycling of materials will help to  
conserve natural resources and ensure that it is recycled in a manner that  
protects human health and environment.  
4
 
CE Regulatory Notice  
This equipment complies with the requirements set out in the Council Directives on the  
Approximation of the Laws of the Member States relating Electromagnetic Compatibility  
(2004/108/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of  
Certain Hazardous Substances in Electrical And Electronic Equipment Directive  
(2002/95/EC), Turkish EEE Directive; the Commission Regulation (EC) No 1275/2008  
implementing Directive 2005/32/EC of the European Parliament and of the Council with  
regard to eco-design requirements for standby and off mode electric power consumption of  
electrical and electronic household and office equipment, and the Directive 2009/125/EC of  
the European parliament and of the council establishing a framework for the setting of  
eco-design requirements for energy-related products.  
Notes on Installation  
1. Install the device near the rear-view mirror to obtain the best  
open-field view.  
2. Make sure that the lens is within the wiping range of the windscreen  
wiper to ensure a clear view even when it rains.  
3. Do not touch the lens with your fingers. Finger grease may be left  
on the lens and will result in unclear videos or snapshots. Clean the  
lens on a regular basis.  
4. Do not install the device on a tinted window. Doing so may damage  
the tint film.  
5. Make sure that the installation position is not hindered by the tinted  
window.  
MODEL: SP5  
Li-Polymer 3.7V 470mAh 1.7Wh  
Be sure to use only the supplied battery and charger. The use of any  
other type of battery or charger may damage the device and void your  
warranty.  
Caution  
Use the authorized charger only.  
Never disassemble by yourself.  
Never short-circuit the battery.  
Dispose of the battery properly.  
Exposing the battery to open flames can cause explosion.  
WANSGLORY CO., LTD.  
5
 
1 Introduction  
Thank you for purchasing this advanced Car Recorder. This device  
is specifically designed for real time video and audio recording  
when driving.  
1.1 Features  
Full HD camera (1920x1080 @ 30fps)  
2.4” LCD color screen  
Wide angle lens  
High power LED for low light environments  
Motion detection  
Automatic Emergency recording for collision detection  
Supports Micro SDHC up to 32GB  
1.2 Package Contents  
The package contains the following items. In case there is any  
missing or damaged item, contact your dealer immediately.  
Car Recorder  
Bracket  
CD-ROM  
Car adapter  
Quick start guide  
Video cable  
USB cable  
6
 
1.3 Product Overview  
Front View  
Rear View  
Top and Bottom Views  
10  
1
2
3
11  
12  
Side (Left and Right) Views  
9
13  
6
4
7
5
8
16  
14  
15  
No.  
1
Item  
Microphone  
No.  
9
Item  
Back Button (  
LCD Panel  
Up Button (  
)
2
Bracket Socket  
Bracket Socket  
Memory Card Slot  
Power Button  
10  
11  
12  
13  
14  
15  
16  
3
)
4
Down Button (  
Enter Button (  
)
5
)
6
USB Connector  
HDMI Connector  
Reset Button  
Wide Angle Lens  
Speaker  
7
8
LED Light  
Note: To operate the device, press the corresponding buttons (9, 11, 12, 13) according to  
guide icons shown the screen.  
7
 
2 Getting Started  
2.1 Inserting the Memory Card  
Insert the memory card with the gold contacts facing the back of the  
device. Push the memory card until it clicks into place.  
To remove the memory card  
Push to eject the memory card out of the slot.  
Note: Do not remove or insert the memory card when the device is turned on. This may  
damage the memory card.  
8
 
2.2 Installing in Vehicles  
2.2.1 Mount to Windshield  
Step2  
1.  
2.  
Press and hold the  
PUSH button and pull to  
detach the bracket base.  
Step1  
Attach the device to the  
bracket base. Turn and  
tighten the car holder  
and the bracket base to  
make sure the device is  
securely locked in place.  
With the suction-cup  
laying flat, position the  
suction-cup on the  
3.  
4.  
windshield.  
Hold the base firmly on  
the windshield and  
press down the clamp  
to mount the car holder  
to the windshield. Make  
sure the base is  
securely locked in place.  
5.  
6.  
Press and hold the  
PUSH button and  
connect the base to the  
bracket.  
Release the PUSH  
button and make sure  
the base is securely  
locked in place.  
9
 
2.2.2 Adjust Device Position  
Knob  
Knob  
Rotate the knob to swivel  
the device vertically.  
Rotate the knob to swivel the  
device horizontally up to 360°.  
10  
 
2.3 Connecting to Power  
Use only the supplied car adapter to power up the device and  
charge the built-in battery.  
1. Connect one end of the car adapter to the USB connector of  
the device.  
2. Plug the other end of the car charger to the cigarette lighter  
socket of your vehicle. Once the vehicle engine is started, the  
device automatically turns on.  
Note:  
The orange LED lights up while the battery is charging.  
Please take note if the environment temperature reaches 45°C or above, the car adapter still  
can supply power to device, but it will not charge the Lithium-ion battery. This is the  
characteristic of Lithium-ion and is not a malfunction.  
11  
 
2.4 Powering the Device On / Off  
2.4.1 Auto Power On/Off  
Once the vehicle engine is started, the device automatically turns on.  
If the Automatic Record function is enabled, the recording will  
automatically start right after the device turns on.  
See Set Automatic Recording on page 13.  
Once the vehicle engine shuts down, the device automatically saves  
the recording and turns off the power within 10 seconds.  
See Delay Shutdown on page 24.  
2.4.2 Manual Power On/Off  
To manually turn on the power, press the  
POWER button.  
To turn off, press and hold the POWER  
button  
for at least 2 seconds.  
12  
 
2.5 Initial Settings  
Before using the device, we recommend you to enable the  
Automatic Record function and set up the correct date and time.  
2.5.1 Set Automatic Recording  
To enable the recording to start automatically after you turn on the  
power, do the following:  
1. Press the  
2. Press the  
button to enter the OSD menu.  
button to select  
/
Automatic Record and press the  
button.  
3. Press the  
/
button to select On  
and press the  
button.  
4. Press the BACK button to exit the  
menu.  
2.5.2 Set the Date and Time  
To set the correct date and time, do the following:  
1. Press the  
button to enter the OSD menu.  
2. Press the  
/
/
button to select Date / Time and press the  
button.  
3. Press the  
button to adjust the  
value and press the  
button to  
move to another field.  
4. Repeat step 3 until the date and time  
setting is complete.  
13  
 
3 Using the Car Recorder  
3.1 Recording Videos  
3.1.1 Record videos while driving  
When the vehicle engine starts up and the Automatic Record  
function is enabled, the device automatically turns on and starts  
recording.  
Recording will automatically stop when the engine is switched off.  
Or, press the  
button to stop recording manually.  
Note:  
On some cars, the recording will continue when the engine is switched off.  
If this happens, do one of the following:  
- Manually turn off the cigarette lighter.  
- Remove the car adapter from the cigarette lighter.  
3.1.2 Record all other types of videos  
1. Press the  
2. Press the  
button to start recording.  
button to stop recording.  
Note:  
One video file is saved for every 3 or 5 minutes of recording. See Using the Menu in page 22.  
The device saves the recording in the memory card. If the memory card capacity is full, the  
oldest file in the memory card is overwritten.  
14  
 
3.1.3 Emergency Recording  
During video recording, press the  
button to continuously record the video  
in one file until the memory card storage  
is full or the recording is manually  
stopped.  
To stop the recording, press the  
button.  
Note: If the Collision Detection function is enabled and a collision is detected, the device will  
automatically trigger the emergency recording. See Using the Menu in page 22.  
15  
 
3.1.4 The Recording Screen  
4
1
5
2
3
6
7
No.  
Description  
Item  
1
Indicates the recording duration.  
Duration  
Indicates the current recording date  
and time.  
2
Date and time  
Press the  
menu.  
button to enter the OSD  
Guide icon  
(Menu)  
3
4
5
Indicates the remaining battery power.  
Battery  
Press the  
recording.  
button to stop the  
Guide icon  
(Stop)  
Press the  
record the video in one file until the  
recording is manually stopped.  
button to continuously  
Guide icon  
(Emergency)  
6
7
Press the  
Playback mode.  
button to switch to  
Guide icon  
(Playback)  
16  
 
3.1.5 Using the LED Light  
You can use the LED light to provide extra light when the lighting is  
insufficient  
.
To enable the LED light, do the following:  
1. Press the  
2. Press the  
button to enter the OSD menu.  
button to select  
/
Auxiliary Light and press the  
button.  
3. Press the  
/
button to select On  
and press the  
button.  
4. Press the  
menu.  
button to exit the  
Note:  
Turn off LED lights when the battery is low.  
When using LED lights for a long time, it may become hot. Take care not to touch the hot LED  
lights.  
3.1.6 Taking Snapshot  
You can also use this device to take snapshots of the current scene.  
From the standby screen, press the  
button to take a snapshot.  
Note: If recording is in progress, press the  
button to stop the recording.  
17  
 
3.2 Playback Videos and Photos  
1. If recording is in progress, press the  
button to stop  
recording. The standby screen is displayed.  
2. Press the  
3. Press the  
button to enter the OSD menu.  
button to select the  
/
file category that you want to browse  
and press the  
button.  
4. Press the  
/
button to view the  
next or the previous file and press  
the  
button to view the file in full  
screen.  
Note: From the standby screen, you can directly enter Playback mode by pressing  
button.  
The last recorded video is displayed on the screen.  
18  
 
3.2.1 Playing Videos  
To play videos, do the following:  
1. If recording is in progress, press the  
recording.  
button to stop  
2. Press the  
button to enter the OSD menu.  
3. Press the  
/
/
/
button to select File Playback and press the  
button.  
4. Press the  
press the  
button to select Video or Emergency and  
button.  
button to browse  
5. Press the  
for the desired video file and press  
the button to play the video.  
6. Press the button to pause the  
playback. Press it again to resume.  
3.2.2 Viewing Photos  
To view photos, do the following:  
1. If recording is in progress, press the  
recording.  
button to stop  
2. Press the  
button to enter the OSD menu.  
3. Press the  
/
/
/
button to select File Playback and press the  
button.  
4. Press the  
button.  
button to select Picture and press the  
5. Press the  
press the  
button to browse for the desired photo file and  
button to view the file in full screen.  
19  
 
3.2.3 The Playback Screen  
Video Playback Screen  
Photo Playback Screen  
7
7
6
1
3
4
2
3
4
2
5
No.  
Description  
Indicates the recorded date and time.  
Item  
1
2
Date and time  
Press the  
button to return to file  
Guide icon  
(Back)  
selection display.  
Press the  
previous video/photo.  
button to view the  
Guide icon  
(Previous)  
3
4
5
Press the  
video/photo.  
button to view the next  
Guide icon  
(Next)  
Press the  
video playback.  
button to pause the  
Guide icon  
(Pause)  
6
7
Indicates the elapse time.  
Duration  
Battery  
Indicates the remaining battery power.  
20  
 
3.2.4 Deleting Files  
To delete file(s), do the following:  
1. If recording is in progress, press the  
recording.  
button to stop  
2. Press the  
button to enter the OSD menu.  
3. Press the  
/
button to select  
File Deletion and press the  
button.  
4. Press the  
/
button to select the  
file category and press the  
button.  
5. Press the  
/
button to select the  
file that you want to delete and press  
the  
button to enter the Delete  
menu.  
6. Press the  
/
button to select an option.  
Item  
Description  
Delete the current file.  
Delete One  
Delete All  
Delete all files.  
7. Press the  
button to confirm delete.  
Note: Deleted files cannot be recovered. Ensure the files have backup before deletion.  
21  
 
4 Adjusting the Settings  
4.1 Using the Menu  
You can customize the video recording and other general settings  
via the on-screen display (OSD) menus.  
1. If recording is in progress, press the Record button to stop  
recording.  
2. Press the  
button to open the OSD menu.  
3. Press the  
/
button to select a menu option and press the  
button to enter the selected menu.  
4. Press the  
the  
/
button to select the desired setting and press  
button to confirm the setting.  
5. Press the  
button to exit the menu.  
22  
 
4.2 Menu Tree  
Refer to the below table for details on menu items and available  
menu options.  
Menu  
Description  
Available option  
option  
Auxiliary  
Light  
Enable/Disable the LED light.  
On / Off  
File  
Playback  
Select the file category that  
you want to view.  
Video / Emergency /  
Picture  
Date / Time  
Set the date and time.  
Time Stamp Enable/Disable the date  
stamp.  
On / Off  
Resolution  
Set the video resolution.  
1080P(1920x1080) /  
720P(1280x720)  
LCD Setting Set the duration for the  
display to automatically turn  
off right after video recording  
starts.  
On / Turn Off After 30  
Sec. / Turn Off After 3  
min. / Off  
Voice  
Record  
Enable/Disable the voice  
recording.  
On / Off  
Beep  
Enable/Disable the beep.  
On / Off  
On / Off  
Automatic  
Record  
Enable/Disable the device to  
automatically record video  
after the device is turned on.  
Record  
Interval  
Set the recording duration for  
each recorded video file.  
3 mins / 5 mins  
On / Off  
Motion  
Detection  
Enable/Disable the motion  
detection. If this function is  
enabled and the device  
detects any object movement,  
it will automatically start the  
recording.  
23  
 
Menu  
option  
Description  
Available option  
High Sensitivity /  
Normal Sensitivity /  
Low Sensitivity / off  
Collision  
Detection  
Enable/Disable the collision  
detection. If this function is  
enabled and any collision is  
detected, the device will  
automatically trigger the  
emergency recording.  
Delay  
Shutdown  
Set the delay duration before  
turning off the power.  
10 Sec. / Off  
Language  
Set the on-screen display  
menu language.  
File Deletion Delete the file(s).  
Video / Emergency /  
Picture  
TV standard Set the TV type based on  
your local region.  
NTSC / PAL  
Format  
Default  
Format the memory card.  
Yes / No  
Yes / No  
Reset all settings to factory  
default settings.  
24  
 
5 Installing the Software  
1. Place the attached CD ROM into the CD player.  
2. If the CD does not execute automatically, please use Windows  
File Manager to execute the Install_CD.exe file in the CD.  
The following screen will be shown up.  
3. Press the [Menu] item to start the installation process according  
to the instructions on-screen.  
25  
 
6 Editing software  
ArcSoft Total Media Extreme (TME) ™ manages your media for you,  
and gives you tons of fun and exciting ways to create and share  
projects featuring your photo, video, and music files. Edit, enhance  
and add creative effects to your photos. You can  
Create your own movies or photo slide shows complete with  
soundtrack.  
Upload your files easily to YouTube™!  
Or share them through simple email attachments or popular  
photo printing.  
26  
 
7
Specifications  
Item  
Image sensor  
Description  
1/3.2” CMOS sensor  
2592 (H) x 1944 (V)  
Effective pixels  
Storage media  
LCD display  
Support Micro SDHC, up to 32GB class 4 or above  
2.4” LCD color TFT (112K pixels)  
Wide Angle Fixed Focus lens  
F2.4, f=3.0mm  
Lens  
Focus range  
1.5m~Infinity  
Resolution: Full HD (1920 x 1080), 30fps  
HD (1280 x 720), 30fps  
Movie Clip  
Format: .mov  
Resolution: 5M (2592 x 1944)  
Format: DCF (JPEG, Exif: 2.2)  
Still image  
(Snapshot)  
Electronic shutter  
Auto:1/2 ~1/2000 sec.  
Shutter  
G-Sensor  
ISO  
3-Axis G-Force sensor  
Auto  
Auto  
Yes  
Yes  
Yes  
White Balance  
Assist Lamp  
Microphone  
Speaker  
27  
 
Item  
Interface  
Description  
Mini USB, Mini C Type HDMI  
Battery  
Built-in 470mAH Li-polymer rechargeable  
Operating  
Temperature  
0° ~ 50° C  
Operating  
Humidity  
20 ~ 70% RH  
-20° ~ 80° C  
Storage  
Temperature  
Dimensions  
Weight  
67.8 x 62 x 30 mm  
Approx. 85g  
28  
 
Copyright © 2012  
All rights reserved.  
All other marks, products or company names mentioned in this guide are  
trademarks of their respective companies.  
 

Edelbrock Automobile Parts R08463S User Manual
Edimax Technology Network Card EW 7108PCg User Manual
Estate Range TEP315V User Manual
Euro Pro Iron GI475 User Manual
Fisher Price Video Games T6356 User Manual
Focal Car Speaker 30 A1 DB User Manual
FujiFilm Digital Camera 16410594 User Manual
GE Refrigerator 162D3904P005 User Manual
GE TV Converter Box 22729 User Manual
GE Washer GFWN1000 User Manual